Description
OFFICE CHAIR ERGOS STUDY
The office chair Ergos Study is comfortable and ergonomically designed. It is intended for prolonged sitting. The office chair offers many ergonomic settings that enable optimal and comfortable sitting at an affordable price. The seat of the ergonomic office chair is adjustable in height. The height and inclination of the backrest can be adjusted with a lever under the seat on the left side. For even more comfortable sitting, the user can adjust the lumbar support, which supports the spine. The office chair allows you to adjust the headrest and armrests. The maximum load capacity is up to 110 kg. It is suitable for users with an approximate height of 170-180 cm.
MADE IN COMPLIANCE WITH INTERNATIONAL STANDARD ISO 9001, WITH OBTAINED CERTIFICATES AND COMPLETED TESTS:
1. BIFMA
an accredited certification body for the Business and Institutional Furniture Manufacturers Association (BIFMA), providing certification for information resources, ensuring manufacturers certify their sustainable products by third parties. BIFMA sets standards for the stability and durability of office furniture and has gained wide recognition due to its rigorous and established standards.
2. ISO9001
defined as an international standard that specifies requirements for a quality management system (QMS). Organizations use the standard to demonstrate their ability to consistently provide products and services that meet customer requirements and regulations.
3. SGS
a leading global inspection body that conducts verification, testing, and certification. It is widely recognized as a benchmark for quality and integrity.
4. EN 1335-1:2020+A1:2023
this European standard specifies requirements for the safety, strength, and durability of all types of seating intended for use where the mass does not exceed 130 kg.
5. ANSI
the American National Standards Institute provides an additional level of trust and compliance.
INSTRUCTIONS FOR USE
1. HEADREST HEIGHT ADJUSTMENT
The height of the headrest is changed by holding the headrest with both hands and moving it up or down, depending on the position that suits us.
2. ADJUSTING THE HEIGHT OF THE LUMBAR SUPPORT
There is a height-adjustable lumbar support on the back of the backrest. The height is adjusted by holding the round handles on the lumbar support with both hands and moving the lumbar support up or down.
3. 3D ARMREST ADJUSTMENT
The 3D adjustment of the armrests allows the armrests to be moved vertically, forwards and backwards, and left and right. To adjust the height of the backrests, use the buttons on the underside of the backrests. The desired forward/backward and left/right adjustment is made by grasping the upper part of the armrest with your hand and moving it to the position that suits you.
4. ADJUSTING THE WIDTH OF THE ARMRESTS
The distance of the armrests can be adjusted with the help of three screws on the lower part of the armrests, which are under the seat. The openings on the lower part of the backrests allow the desired distance of the armrests to be adjusted between 38 and 44 centimeters.
5. MEMORY FOAM SEAT
The seat contains high-quality, 7 cm thick memory foam, which ensures special comfort by distributing point pressures on the body.
6. SEAT HEIGHT ADJUSTMENT
The height of the chair can be changed with the handle located on the right side of the chair, under the seat. The height of the chair is lowered by pulling the handle upwards while sitting on the chair, thereby influencing the lowering of the height with one’s own weight. If we want to raise the seat, we first stand up and pull the handle under the seat upwards.
7. ADJUSTING THE TILT OF THE BACKREST
The inclination of the backrest can be adjusted with the lever located on the left side of the chair under the seat. If the backrest is fixed, unlock it by pulling the handle upwards. Only then can the backrest be moved backwards and forwards to the desired position, which we do by resting our own weight on the backrest. After determining the appropriate position, fix it by pushing the lever down again.
8. ADJUSTING THE POWER OF THE BACKREST INCLINE
While setting the desired tilt strength, the backrest should be unlocked and in the basic position. The lever under the seat on the left side should be in the upper position. The strength of the backrest tilt is adjusted with a rotary lever located in the middle of the lower part of the seat. By turning the handle to the right, we will need more power to move the backrest back and vice versa.
9. BASE
The chair has a high-quality aluminum base, manufactured in accordance with the demanding international BIFMA standard.
10. SILICONE WHEELS
The last part of the chair is represented by 60 mm large PU silicone wheels. Silicone, a high-quality, rubber-like material, does not damage the parquet and does not leave dark spots. The quality of the wheels also complies with the BIFMA international standard.
Reviews
There are no reviews yet