Description
The ergonomic PRESTIGE 2 offers several possibilities of use:
- When using a thicker keyboard approximately 20 mm thick that does not have its own wrist rest, place the keyboard on the bottom panel. Attach the added wrist rest to the bottom panel so that it rests on the ledge of the bottom panel. It can rest on its front or back ledge, whichever suits you best. This ensures wrist balance while typing.
- The posture corrector, shaped as a transparent panel, prevents leaning over the desk once the optimal sitting position is achieved. Place it above the keyboard – if you lean over the desk, you won’t see the keyboard, which encourages you to return to the original, optimal position.
- When using documents, place the document pad on the attachment on the top panel in either a vertical or horizontal position. This allows for safe and more efficient transferring of content from paper documents to the computer. Adjust the height and angle of the document pad with the adjustment plate and by using different openings on the document pad.
- The document pad can also be used as a shelf for storing documents if it is placed in the openings on the top panel with the attachments on the right side.
- When using a laptop, place it directly on the posture corrector or on one of the shelves.
- When using a tablet, place it on the document pad, on the bottom panel, or between the adjustment plate and the top panel.
Specification:
Material: white and transparent acrylic glass
- Bottom panel: 410 x 300 mm. It can be positioned at a 10°, 15°, or 20° angle.
- Legs: 150 mm x 100 mm
- Wedge: 40 x 15 mm
- Support: 200 mm x 170 mm. It holds a long, narrow shelf and the top panel on the left or right side.
- Top panel with openings and three top attachments: 155 x 1110 mm. The openings allow for adjusting the height of shelves and the posture corrector.
- Attachment on the top panel: 80 x 15 mm. Intended for the installation of the document pad.
- Shelf: 305 mm x 185 mm
- Shelf with posture corrector: 205 to 290 x 310 mm
- Long, narrow shelf with openings: 1110 mm x 145 mm
- Adjustment plate: 200 mm x 110 mm and railing on the adjustment plate: length 200 mm
- Document pad with openings and anti-slip ledges: 335 mm x 235 mm
- Wrist rest: 370 mm x 70 mm x 30 mm
- Anti-slip ledge: 365 x 8 mm
The height of the stand is 21.5 cm.
The length of the stand is 110 cm.
CAUTION! The document pad must not be used without the correction plate, as the load may cause it to break at the top or side openings.
Reviews
There are no reviews yet